• Motherboard Supported
  • EATX
  • ATX
  • Micro ATX
  • Mini ITX
• Number of Fans Supported2
• Number of Fans Installed3
• Fan Size Supported
  • 6.30″
  • 5.51″
  • 4.72″
• Installed Fan Size
  • 6.30″
  • 5.51″
• Installed Fan Size Details
  • 2 x 160mm
  • 1 x 140mm
• Features
  • Dust Filter
  • Cable Management
  • Reset Button
• Number of Internal 3.5″ Bays2
• Number of Internal 2.5″ Bays6
• Total Number of Expansion Slots7
• Total Number of USB Ports3
• USB Port Details
  • 2 x USB 3.0
  • 1 x USB Type C
• Front USBYes
• Total Number of Audio In Ports1
• Front Audio InYes
• Total Number of Audio Out Ports1
• Front Audio OutYes
• Color FamilyWhite
• Product ColorWhite
• Product Material
  • Steel
  • Tempered Glass
  • Mesh
• Cooler TypeFan/Liquid Cooler
• Form FactorMid-tower
• Maximum PSU Length8.66″
• Maximum GPU Length15.43″
• Height19.4″
• Width9.3″
• Depth18.9″
• Country of OriginChina

LANCOOL 216

AIRFLOW FOCUS

The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.

AVAILABLE IN TWO COLORS

WHITE RGB / BLACK RGB / BLACK

CONTINUOUS FRONT TO TOP MESH

To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel.

The mesh panel beside the PSU shroud chamber is removable but is also an integral part of the support mechanism for the side tempered glass panel. Remove with care!

2 x 160MM FRONT FANS

AND 1 X 140MM REAR FAN INCLUDED

LANCOOL 216 RGB FANS

The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.

Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.

AIR COOLING MODE / WATER COOLING MODE

The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.

AIR COOLING

Set higher, the motherboard leaves room above the PSU shroud for wider fans.

WATER COOLING

Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water

FRONT I/O CAN BE RELOCATED

Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.

HARDWARE COMPATIBILITY

The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.

LATEST GEN. GPU READY

With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.

PRESSURE LEAK FREE

Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.

REMOVEABLE TOP RADIATOR BRACKET

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance.

Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.

PCIE FAN BRACKET

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.

VERTICAL GPU COMPATIBLE

The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.

Product Type: Computer Case
Technical Information
Motherboard Supported:

• EATX
• ATX
• Micro ATX
• Mini ITX

Number of Fans Supported: 2
Number of Fans Installed: 3
Fan Size Supported:

• 6.30″
• 5.51″
• 4.72″

Installed Fan Size:

• 6.30″
• 5.51″

Installed Fan Size Details:

• 2 x 160mm
• 1 x 140mm

Features:

• Dust Filter
• Cable Management
• Reset Button

Bays
Number of Internal 3.5″ Bays: 2
Number of Internal 2.5″ Bays: 6
I/O Expansions
Total Number of Expansion Slots: 7
Interfaces/Ports
Total Number of USB Ports: 3
USB Port Details:

• 2 x USB 3.0
• 1 x USB Type C

Front USB: Yes
Total Number of Audio In Ports: 1
Front Audio In: Yes
Total Number of Audio Out Ports: 1
Front Audio Out: Yes
Physical Characteristics
Color Family: White
Product Color: White
Product Material:

• Steel
• Tempered Glass
• Mesh

Cooler Type: Fan/Liquid Cooler
Form Factor: Mid-tower
Maximum PSU Length: 8.66″
Maximum GPU Length: 15.43″
Height: 19.4″
Width: 9.3″
Depth: 18.9″
Miscellaneous
Country of Origin: China